V97MS Micro Spray Valve The V97MS Micro Spray Valve is ...
KH10 Single Station LPIM Melt System
Suitable for product coating by all kinds of low pressure molding hot-melt adhesive resin; The working pressure from 0 to 6 Mpa, It won’t damage parts, have no chemical reaction, rapid prototyping, and can replace the pouring sealant with shell. After forming protection, It has insulation and waterproof effect. KONIG low pressure injection molding solution is Mainly applied to bulk-production of Automotive Electronics and automotive wiring harness, coaxial cable, waterproof connectors, LED modules and lamps, PCBA, sensors, coil, soft circuit boards, polymer battery, smart home, wearable electronic.
Key Features
Universal Connectivity
KH10 can be connected with all kinds of low pressure injection molding machine, easy to use.
Modular Fission Design
Fission structure design, free of carbon if adding enough glue.
High Melt Velocity
New plasticizing accelerating structure, the melt velocity up to 5kg/H.
Advanced Thermal Insulation
Aviation materials used to warming comprehensively all the cylinder, reduce the surface temperature of sheet-metal, good heat preservation functions.
Equipment Protection
System-ready delay prevents cold-start damage to pump.
Efficiency & Standby Mode
Reduce-temperature standby mode minimize adhesive degradation and lowers unit energy consumption during idle periods. Easy mold-set change platform and ejection system installed.
Optimized Processing
A reservoir tank design. Perfect processing conditions for heat sensitive polyamide hot melts adhesives.
Key Specification
| Machine Size | 783mm × 440mm × 930mm (55Kg) |
| Packing Size | 900mm × 560mm × 1130mm (85Kg) |
| Plant View | 783mm * 440mm |
| Work Station Height | 930mm |
| Melting Tank Model & Qty | KH10 (10Liter) × 1PC |
| Heated Hose Model & Qty | KJ16 × 1PC |
| Electricity | 220VAC / 1Phase / 50 or 60Hz |
| Temperature Range Ambient | up to 250°C |
| Max. Power | 4.5Kw |
| Min. Air Pressure | 0.5Mpa |
×