V97MS Micro Spray Valve The V97MS Micro Spray Valve is ...
H&M400 Single Station Low Pressure Molding Machine
Suitable for product coating by all kinds of low pressure molding hot-melt adhesive resin; The working pressure from 0 to 6 Mpa, It won’t damage parts, have no chemical reaction, rapid prototyping, and can replace the pouring sealant with shell. After forming protection, It has insulation and waterproof effect. KONIG low pressure injection molding solution is Mainly applied to bulk-production of Automotive Electronics and automotive wiring harness, coaxial cable, waterproof connectors, LED modules and lamps, PCBA, sensors, coil, soft circuit boards, polymer battery, smart home, wearable electronic.
Key Features
Injection system using the latest super hard gear pump and glue guns, it has compact structure, injecting stability, and long service life
Single and vertical injection glue gun, providing larger application space for more complex mould.
Injecting pressure can be adjusted through the control panel.
Work station and melt system adopts fission layout and uses flexible.
Three temperature controllers for all system components (glue gun, heated hose, Melt tank), controls the temperature accurately.
Using double hands for working, and equipping with infrared light curtain protection switch.
Mould with a standard design, easy mold-set change , and equipped with product ejection device for removing product from the mould convenient.
Key Specification
| Machine Size | 830mmX720mmX1840mm (373Kgs) |
| Packing Size | 1030mmX920mmX2040mm (423Kgs) |
| Work Station Height | 940mm |
| Melting Tank Model &Q’ty | KH05 (5Liter)X1PC |
| Nozzle & Tip Angle | KG40X1PC(36° ) |
| Heated Hose Model &Q’ty | KJ16X1PC |
| Electricity | 220VAC/1Phase/50 or 60Hz |
| Temperature Control Zones | 3 |
| Temperature Range Ambient | up to 250℃ |
| Max. Power | 4.5Kw |
| Min. Air Pressure | 0.5Mpa |
| Air Consumption | 0.1m³/min |
| Clamping Device | Cylinder |
| Clamping Force | Max.1.2Ton |
| Clamping Stroke (mm) | 150mm |
| Control System | PLC+7″ HMI |
| LPIM Standard Mold Set Size (mm) | 200X150X150 |
| Max. Mold Set Size (mm) | 300X200 X150 |
×