V97MS Micro Spray Valve The V97MS Micro Spray Valve is ...
H&M1250B Single Station Low Pressure Molding Machine
Suitable for product coating by all kinds of low pressure molding hot-melt adhesive resin; The working pressure from 0 to 6 Mpa, It won’t damage parts, have no chemical reaction, rapid prototyping, and can replace the pouring sealant with shell. After forming protection, It has insulation and waterproof effect. KONIG Low pressure injection molding solution is Mainly applied to bulk-production of Automotive Electronics and automotive wiring harness, coaxial cable, waterproof connectors, LED modules and lamps, PCBA, sensors, coil, soft circuit boards, polymer battery, smart home, wearable electronic.
Key Features
The workbench design for rotating structure. After injecting, the mould continuous pressure, then rotating and cooling with the workbench.
Compact structure, convenient operation, different location for taking or putting products and injecting, operation. Safety.
Mould number can design to be 2-8 sets according to needs of production (needs to determine before custom-made mechanism). High production efficiency.
Can use on the production line, easy to extend the automation production.
Melting Tank and injection molding machine use the integration of design, small occupation area.
Mould with a standard design, easy mold-set change.
Key Specification
| Machine Size | 2788 × 1770 × 2330 mm (3900 kg) |
| Packing Size | 3100 × 2200 × 3000 mm (4600 kg) |
| Work Station Height | 820 mm |
| Melting Tank Model & Qty | KH10 × 2PC |
| Heated Hose Model & Qty | KJ16 × 2PC |
| Electricity | 380VAC / 3 Phase / 50 or 60Hz |
| Temperature Control Zones | 4 |
| Temperature Range Ambient | Up to 250°C |
| Max. Power | 14 kW |
| Min. Air Pressure | 0.5 MPa |
| Air Consumption | 0.1 m³/min |
| Clamping Device | Servo (Cylinder) |
| Clamping Stroke | 250 mm |
| Clamping Force | Max. 5T |
| Control System | PLC + 10″ HMI |
| LPIM Standard Mold Set Size | 300 × 400 × 405 mm |
| Max. Mold Set Size | 350 × 400 × 405 mm |
| Remarks | This machine is divided into injection machine and hot runner system. |
×