V01CS Spray Valve The V01CS Spray Valve is designed for ...
V97MS Micro Spray Valve
The V97MS Micro Spray Valve is a high-precision dispensing solution designed for controlled micro-spray applications using advanced LVLP (Low Volume Low Pressure) technology. Engineered for accurate fluid atomization, it produces uniform spray patterns ranging from 3 mm to 20 mm while minimizing material consumption and overspray.
Featuring ultra-fine disposable dispensing tips, the valve delivers highly concentrated spray coverage for precision coating and micro-dispensing applications. Its positive cut-off design ensures clean dispensing with minimal dead fluid volume. The V97MS is suitable for medium- to low-viscosity fluids and supports high-speed operation exceeding 400 cycles per minute.
Key Features
- LVLP spray technology
- Uniform spray patterns from 3 mm to 20 mm
- Ultra-fine dispensing tips
- Minimal overspray and mist formation
- Positive cut-off design
- High-speed operation exceeding 400 cycles/minute
Key Specification
Specification | Details |
Size | φ26.9mm (Fluid body) x 130mm length |
Weight | 308g |
Fluid body | SUS303 |
Fluid inlet fitting, tip adapter | SUS303 |
Air cap | SUS303 |
Air cylinder body | SUS303 |
Piston needle | SUS303 |
Needle packing | Teflon®, SUS303 |
Fluid inlet thread | 1/8NPT female |
Valve operating air inlet thread | M5×0.8 female |
Mounting | M6 tapped hole |
Free flow orifice | GP needle tips 23ga (ID φ0.33mm) to 33ga (ID φ0.1mm) |
Valve operating air pressure | 0.4~0.62MPa |
Maximum nozzle air pressure | 0.2MPa (regulated) |
Maximum fluid pressure | 0.7MPa |
×